Basic Level
- Practical case: Voltage induction by magnetic movement
Learn Analog Electronics by building a generator with an Inductor and a magnet. Observe real voltage spikes and light an LED using Faraday’s Law of Induction. - Practical case: Simple RL Low-Pass FilterMaster Analog Electronics by building an RL low-pass filter with an Inductor. Observe signal attenuation and block high frequencies to reduce noise effectively.
- Practical case: Opposition to DC current changeMaster Analog Electronics by building a soft-start circuit with an Inductor. Visualize current delay as a lamp gradually brightens to limit inrush current.
- Practical case: The coil as a simple electromagnetMaster Analog Electronics by building a powerful electromagnet using a simple Inductor. Learn to control magnetic fields and lift metal objects with DC current.
Medium Level
- Practical case: Noise suppression with RF chokeLevel: Medium – Demonstrate the high impedance of the inductor at high frequencies to block noise in power lines.## Objective and use case You will…
- Practical case: Resonance in LC tank circuitLevel: Medium | Analyze the energy exchange and determine the resonant frequency of an AC-driven LC tank.## Objective and use caseIn this practical case,…
- Practical case: Boost converter storageLevel: Medium | Understand magnetic energy storage to boost voltage.## Objective and use case In this practical case, you will build a basic open-loop Boost…
- Practical case: Inductive peak protectionLevel: Medium | Objective: Analyze the transient voltage generated when disconnecting an inductor and mitigate it using a flyback diode.## Objective and use…
