Basic Level
- Practical case: High power circuit isolation
Master Analog Electronics by building a Relay driver circuit. Learn to safely switch high-power loads with low-voltage signals and verify galvanic isolation. - Practical case: DC Motor ReversingMaster Analog Electronics by building a Relay H-bridge to control DC motor direction. Learn to switch polarity for clockwise spin, reverse motion, and braking.
- Practical case: Latching Alarm SystemMaster Analog Electronics by building a self-latching Relay circuit. Create a reliable alarm memory system that holds active states until manually reset.
- Practical case: DC motor control with relay and pushbuttonMaster Analog Electronics by building a Relay circuit to safely control high-power motors. Learn to isolate signals and achieve reliable switching protection.
Medium Level
- Practical case: Automatic Reservoir Pump ControllerLevel: Medium | Construct a transistor-driven relay circuit to automatically control a water pump using a float switch.## Objective and use caseIn this…
- Practical case: Overvoltage protectionLevel: Medium – Disconnect a critical load using a normally closed relay contact when a voltage threshold is exceeded.## Objective and use case In this…
- Practical case: AND and OR logic using relaysLevel: Medium – Build basic logic gates by wiring the contacts of multiple relays in series and parallel.## Objective and use case* **What you will…
- Practical case: Automatic power switchingLevel: Medium – Implement an SPDT relay to automatically alternate between a main power supply and a backup battery.## Objective and use case In this…
