Practical case: Boost converter storage
Level: Medium | Understand magnetic energy storage to boost voltage.
Analog Electronics, Inductor, Inductor_Medium, Medium
FPGA
Practical case: Inductive peak protection
Level: Medium | Objective: Analyze the transient voltage generated when disconnecting an inductor and mitigate it using a flyback diode.
Practical case: voice-controlled RUN/STOP on ULX3S
A compact FPGA voice-activity burst detector on a Radiona ULX3S Lattice ECP5-85F using an INMP441 I2S MEMS microphone. A short, loud spoken burst such as…
Practical case: NMEA GPS Monitor on ULX3S
A practical FPGA-based GPS monitor using the Radiona ULX3S Lattice ECP5-85F , a u-blox NEO-6M GPS module, and 3.3 V UART wiring. It will receive NMEA data at…
Practical case: passive UART monitor with ULX3S
Objective and use case
What you’ll build: A practical UART monitor on the Radiona ULX3S (Lattice ECP5-85F) that passively taps a real 3.3 V, 115200 baud,…
Practical case: SG90 servo tester on ULX3S
Objective and use case
What you’ll build: A bench servo tester on the Radiona ULX3S (Lattice ECP5-85F) that generates a hobby-servo PWM control signal for…