Level: Basic — Build an NE555 astable timer that blinks an LED at a visible frequency.
## Objective and use case
You will build a simple astable timer with…
Level: Basic – Build a monostable timer circuit using the NE555 IC to control an LED output for a set duration.
## Objective and use case
In this practical…
Level: Basic – Understand logical inversion using a NOT gate to activate a standby LED when the main system turns off.
## Objective and use case
You will…
Level: Basic – Learn to use an NPN transistor as a switch to drive a DC motor, including the use of a flyback diode.
## Objective and use case
In this…
In this Digital Electronics lab, use a Binary counter to build a frequency divider. Verify square wave outputs at f/2, f/4, and f/8 relative to the clock.
Build a practical Digital Electronics circuit with a Binary counter. Visualize the 0 to 15 sequence on LEDs and verify synchronous clock signals.
